top of page
FCD 48 x 92 (2).png

Standard Door Flood Barriers

A high-strength single or double door barrier engineered to withstand rushing or standing water.
Product available for quick shipment.

Flex-Cover®

Flex-Cover® by ILC Dover is a high-strength flood barrier engineered to provide a flood barrier for single or double doors. It provides a watertight and impact resistant barrier by combining a structural frame, water barrier, and impact-resistant layers with advanced compression gaskets. Flex-Cover® can be stored near the point-of-use for deployment in minutes.

Flex-Cover® Door functions as a dry flood barrier installed at door and other building openings. Permanently installed wall anchors facilitate rapid deployment prior to a pending weather event.

STANDARD SIZE OPTIONS

DFE - Flood Protection Height
 

2 ft. DFE
4 ft. DFE
6 ft. DFE
54" wide
for 48" opening
92" wide
for 86" opening
Screen Shot 2020-09-21 at 9.09.43 AM.jpg

KEY FEATURES
 

➞  Structural aluminum frame

➞  Tensioned impact webbing

➞  Fabric water barrier

➞  Long-life compression gaskets

➞  Bottom gasket protection in storage

➞  Wall anchor kits

FMApproved_BW_jpg-250x161.jpg
ILC-Dover_Flex-Cover-Door_MKT-0222B-2.jp

NOW OFFERING CONNECTOR POSTS

KEY BENEFITS

RAPID DEPLOYMENT
ICONS NEW_Rapid.png

Flex-Cover® is compact, designed to be stored near the point-of-use for fast deployment in the case of a pending weather event. Using pre-installed anchors mounted into the structure, deployment can be performed by one or two people in minutes.

WATERTIGHT SEALS
ICONS NEW_Water.png

Flex-Cover® advanced compression gaskets provide a watertight seal on the ground and wall interfaces using a unique compression system. The bottom gasket is automatically protected when the Flex-Cover® is removed from position for storage, ensuring watertight sealing for the next weather event.

UP TO 6 FT. DFE
ICONS NEW_6ftDFE.png

Flex-Cover® Door seals against most standard building façades, including concrete, brick, and CMU, with some preparation. Wall anchor kits are available, and a location template is supplied to ensure proper positioning of the permanently installed wall anchors. It meets International Building Code requirements and ASCE 24-14, ASCE 7-16, ANSI-2510, and ASCE 7-10. Product configurations fit:

• 2 Widths available; openings up to 48” (single door) and openings up to 86” (double doors)

• 2 ft. and 4 ft. heights (available in both widths). Panels can be stacked for a total of 6 ft. DFE

Screen Shot 2020-09-21 at 9.18.42 AM.jpg
Screen Shot 2020-09-21 at 9.17.03 AM.jpg

TESTING VIDEO

GALLERY

ANIMATION  VIDEO

bottom of page